Malfunctions - Causes and Remedies
273
Very heavy grass without
structure (for example clover
grass).
• In case of bale formation
conveyor slip, drive with
less blades or switch off
or remove blades and
reduce baling pressure.
• Comprima
V 150 (XC)/V 180 (XC)/
V 210 XC:
Set inner bale core to
soft (refer to chapter
“Adapting the Soft
Core”).
• Comprima
V 150 (XC)/V 180 (XC)/
V 210 XC:
In addition, you can
additionally install a
second drive.
Spare part number
Comprima V 150 (XC):
20 063 650*
Comprima
V 180 (XC)/V 210 XC:
20 063 652*
Machine does not run
smoothly. The bale start is
difficult.
The setting of the inner bale
core is too tight.
• Set inner bale core to
soft (refer to chapter
“Adapting the Soft
Core”).
• Reduce baling pressure.
Pos: 58.7 /BA/St örungen - Urs achen und B ehebung/Rundballe npressen/Stör ungen - Ursac hen und Beheb ung_Sonderp unkt Netz- und Folienrolle_ALLE C omprima @ 4 74\mod_14 72646352125_78. docx @ 320 0337 @ @ 1
Net or film (on the "Net and
film tying" version) does not
completely cover one of the
outer edges of the round
bale.
The net or film roll is not
centrally aligned with the
machine.
• Insert the net or film roll
centrally in relation to the
machine, see chapter
Operation Device,
"Inserting a net roll" or
"Inserting a film roll".
Pos: 58.8 /Layo ut Module /---------------Seitenumbruch---------------- @ 0\mod_119617 5311226_0.docx @ 4165 @ @ 1
To Next Page
Loading...
