Krone EasyCut 28 - Filling Quantities and Lubrication Designations for Gearboxes; Oil Level Check and Oil Change Intervals (Gearboxes)

Maintenance
47
Pos: 20.15 /Übersc hriften/Überschri ften 2/F-J/FFüllmengen un d Schmiermittelbezei chnungen der Getri ebe @ 0\mod_1196951094046_7 8.docx @ 15335 @ 2 @ 1
9.4 Filling Quantities and Lubrication Designations for Gearboxes
Pos: 20.16 /BA/W artung/Mähwerke/Hinweis Ei n Ölwechsel am Mähholm is t nicht erforderlic h. @ 68\mod_1304577391388_7 8.docx @ 628708 @ @ 1
Note
No oil change is required on the cutter bar.
Pos: 20.17 /BA/W artung/Tabellen_Füllmenge n/Mähwerke/Techni sche Daten Betriebss toffe Füllmengen EC 28/3 2 @ 10\mod_1221740251911_7 8.docx @ 137063 @ @ 1
Filling
Quantity
Filtered oils
Bio-degradable
lubricants
[litres] Brand name Brand name
Angular gearbox EasyCut 28 (P) / 32 (P) 1.0 l
SAE90
On request
Angular gearbox EasyCut 28 M 0.5 l
Mower drive gearbox EasyCut 28 M 0.4 l
Cutter bar EasyCut 28 6.0 l
Cutter bar EasyCut 32 7.0 l
Pos: 20.18 /BA/W artung/Zeitinterval le an den Getrieben 200 h @ 0\mod_119 6951919921_78.doc x @ 15373 @ 3 @ 1
9.4.1 Oil Level Check and Oil Change Intervals (Gearboxes)
Note - Oil level check and oil change (gearboxes) and lubricating the machine
Effect: Long expected service life of machine
• First oil change on all gearboxes after 50 operating hours, then every 200 operating hours
(but at least once a year).
• Before using the machine always check the oil level.
• With bio-degradable oils the changing intervals must be complied with absolutely because
of ageing of the oils.
Pos: 20.19 /Layout Module /---------------Seitenumbruch---------------- @ 0\mod_1196175311226_0. docx @ 4165 @ @ 1