3 Start-up
3.1 Connecting hydraulic hoses
6
EasyCut F 320 CV , EasyCut F 360 CV
Supplement to Operating Instructions 150000887_00_en
3 Start-up
WARNING
Risk of injury due to non-compliance with the operating instructions
If the operating instructions are not followed, people may be seriously injured or killed.
Read and observe the operating instructions to avoid accidents.
3.1 Connecting hydraulic hoses
KMG000-076
Depressurise the tractor hydraulics.
Shut down and safeguard the machine, refer to the Safety chapter in the operating
instructions, “Shutting Down and Safeguarding the Machine”.
Clean and dry the connections of the quick couplings.
Connect the hydraulic hoses (2+/2-) to a double-acting control unit on the tractor, with the
locking device in neutral position.