Operation 4
Folding down side guard (working position) 4.1
EasyCut F 320 CV , EasyCut F 360 CV
Supplement to Operating Instructions 150000887_00_en 7
4 Operation
WARNING
Risk of injury due to non-compliance with the operating instructions
If the operating instructions are not followed, people may be seriously injured or killed.
Read and observe the operating instructions to avoid accidents.
4.1 Folding down side guard (working position)
KMG000-079
ü The machine is in the working position.
Unlock the control unit of the tractor.
WARNING!Crushing hazard when folding down the side guards! Before folding down the
side guards ensure that there is no one in the danger zone.
Actuate the double-acting control unit (2-) until the side guards (1) are folded down.
Shut down and safeguard the machine, refer to the Safety chapter in the operating
instructions, “Shutting Down and Safeguarding the Machine”.
Secure the guard cloths using the turnlock fasteners (2).