Need help?Do you have a question about the Krone KR 130-MINISTOP and is the answer not in the manual?
General| Brand | Krone |
|---|---|
| Model | KR 130-MINISTOP |
| Category | Lawn and Garden Equipment |
| Language | English |
Information on ordering spare parts and recommendations.
Identifies and explains warning signs and danger areas on the machine.
Provides specifications and dimensions for KR 130 and KR 160 balers.
Explains how the round baler works and the baling process.
Safety precautions for preparing the round baler for operation.
Instructions for attaching the baler drawbar to the tractor.
Covers PTO shaft adaptation and roller cleaning/checking.
Adjusting wheel height and initial steps for putting the baler into operation.
Covers hydraulic connections, PTO shaft, electrical cables, actuating cord, and road transport.
Additional safety guidelines specific to operating the round baler.
How to set the baler based on crop type and conditions.
Step-by-step guide to the baling process, including gate lock and pick-up lowering.
Guidelines for optimal speeds and filling the bale chamber.
Steps to finish baling and information on the straw trap.
Considerations for baling non-standard crops.
Adjusting pick-up working height, feeler wheels, baffle plate, and compression rake.
Includes threading twine, binding process, and dismounting starter.
Setting the desired baling pressure before starting.
Safety precautions for performing adjustments and settings.
Procedures for adjusting the tail gate lock and pressure gauge.
How to set the baling pressure using the gauges.
Adjusting hook stop, twine guide, and limiters for optimal winding.
Setting the twine brake and distances between rollers and panels.
Setting the distance between the compression rake and pick up.
Essential safety measures for transporting the baler on roads.
Regulations and checks required before road transport.
Safety rules for all maintenance and repair work.
Overview of greasing, lubricating, and checking intervals by hours, bales, and time.
Tyre pressure checks and wheel nut tightening torques.
Instructions for gearbox oil changes and drive chain care.
Adjusting straw trap, safety, and operation of hydraulic systems.
Maintenance of tractor hitch and details on lighting/electrics.
Safety precautions for lubrication tasks.
Using multi-purpose grease and PTO shaft lubrication schedules.
Diagrams showing all lubrication points and intervals.
Safety measures for winter storage.
Steps for cleaning, protecting, and storing the baler for winter.
Safety guidelines for re-commissioning the baler.
Checks for lubrication, hydraulics, tyres, and components like twine holder and blades.
How to free a seized overload coupling after idle periods.
Safety precautions when troubleshooting faults.
Table of common faults, their causes, and recommended solutions.
Installation and operation of the electronic final pressure gauge.
Setup, operation, and functions of the comfort control system.
Specific adjustments and features for wide pick-up models.
Instructions for installing and operating net/foil wrapping.
Installation and operation of the hydraulic starter mechanism.
Optional equipment for pick-up operation and tight cornering.
To Next Page