Start-up
35
Pos: 16.28 /Überschrif ten/Überschrif ten 2/A-E/A nschluß der ele ktrischen Bedien ung @ 2\mo d_1202396974288 _78.doc @ 591 95
6.4 Connecting the electrical controls
Pos: 16.29 /BA/I nbetriebnahme/ Schwader/Option al für Swadro 8 10_907 @ 2\ mod_1202397282 038_78.doc @ 5 9214
(Optional for Swadro 810; Swadro 907)
Pos: 16.30 /BA/I nbetriebnahme/ Schwader/Ansc hluss elektrisch eB edienung/Ans chluss ele ktrische Bedienung SW 807_810 _907 @ 2\mod _120239670763 1_78.doc @ 5 9175
SW9070005
2
3
1
1
Fig. 10
The connection of the electrical controls is made with the power supply plug (1)
Note
If necessary, the continuous power socket and support for the control unit must be previously
installed on the tractor.
To do this:
• Insert the plug for the electrical power supply cable (1) into the appropriate socket (2) of
the tractor.
• Insert the plug for the electrical power supply cable (1) into the appropriate socket (3) of
the machine.
• Position the cable so that it will not come in contact with the wheels.
Pos: 16.31 /BA/I nbetriebnahme/ Schwader/Hin weis Sauberkeit der Stecker und Steckdosen @2 \mod_1202 399563131_78. doc @ 59273
Note
Before inserting the plugs, make certain the plugs and sockets are clean and dry. Dirt and
moisture may result in short circuits!
Pos: 16.32 /BA/--- --Seitenumbruc h------ @ 0\mo d_119617531 1226_0.doc @ 41 65
To Next Page
Loading...
