Table of Contents
4
5.4 Height of tractor lower suspension arms ......................................................................................... 30
6 Start-up..................................................................................................................................................31
6.1 Mounting onto the Tractor................................................................................................................ 31
6.2 Hydraulics ........................................................................................................................................ 32
6.2.1 Special Safety Instructions .......................................................................................................... 32
6.2.2 Connecting the hydraulic lines..................................................................................................... 33
6.3 Lighting connection.......................................................................................................................... 34
6.4 Connecting the electrical controls.................................................................................................... 35
6.5 Install the PTO shaft ........................................................................................................................ 36
7 Driving and Transport..........................................................................................................................37
8 Operation...............................................................................................................................................39
8.1 Overload protection ......................................................................................................................... 39
8.2 From transport into working position ............................................................................................... 40
8.3 Removing the tine protections from the tine tips ............................................................................. 40
8.4 Lowering the rotor arms into working position................................................................................. 40
8.5 Adjusting the Rear Swath Cloth....................................................................................................... 41
8.5.1 Height adjustment of the swath former........................................................................................ 42
8.6 Adjusting the Front Swath Cloth (Swadro 810) ............................................................................... 42
8.7 Adjusting the Rear Swath Cloth (Swadro 907)................................................................................ 44
8.7.1 Adjusting the swath former lengthwise........................................................................................ 45
8.7.2 Height adjustment of the swath former........................................................................................ 45
8.8 Swivel tine arms to working position................................................................................................ 46
8.8.1 For design with collapsible tine arm ............................................................................................ 47
8.9 Move the hoop guards to the working position................................................................................ 48
8.10 Adjusting the raking height mechanically ........................................................................................ 49
8.10.1 Adjusting the raking height - electrically (optional for Swadro 810, Swadro 907) ................... 50
8.10.2 Function of switches on the control unit (optional for Swadro 810, Swadro 907) ................... 50
8.11 Travelling on an incline.................................................................................................................... 52
8.12 Travelling speed und drive speed.................................................................................................... 52
8.13 Switching from working position to transport position ..................................................................... 53
8.14 Move the hoop guards to transport position. ................................................................................... 53
8.15 Swivelling tine arms into transport position ..................................................................................... 54
8.15.1 With rigid tine arms design ...................................................................................................... 54
8.15.2 For design with collapsible tine arm ........................................................................................ 55
8.16 Pushing the Swath Cloth into Transport Position............................................................................ 56
8.17 Pushing the Swath Cloth into Transport Position............................................................................ 57
8.18 Raising the Rotor Arms to Transport Position ................................................................................. 58
8.19 Protecting the Tine Tips (Transport Position and Swather Switched Off)....................................... 58
8.20 Switching from One Side Swath to Two Individual Swaths............................................................. 59
8.21 Switching from Two Individual Swaths to One Side Swath (Swadro 810) ...................................... 60
To Next Page
Loading...
Need help?
General
