Krups ESPRESSERIA AUTOMATIC Manual&Nbsp;

8
ENGLISHFRANÇAISESPAÑOL
Press button at any time to display menus to perform rinse menu and then select SERVICES => OK => RINSING => OK.
You should periodically rinse the machine. We recommend rinsing the machine if it has not been used for several days. Use a
large cup, choose the “Yes” option in the rinsing function and follow the instructions on the screen.
There are three fineness settings on this grinder. You can adjust the fineness to select your own personal preferences.
The finer the grind, the stronger the flavor. To change the grind, turn the knob during the grinding process.
CHANGE THE SETTING DURING GRINDING.
NEVER FORCE THE GRINDING FINENESS SETTING BUTTON.
SUGAR COATED, FLAVORED OR OILY COFFEE/ESPRESSO BEANS CAN CLOG THE GRINDER.
Turn counter-
clockwise for
a finer grind.
Turn clockwise
for a coarser
grind.
ADJUSTING THE GRINDER
PREPARING ESPRESSO AND PRESSURE BREWED COFFEE
YOUR MACHINE IS DESIGNED TO MAKE COFFEE AND ESPRESSO FROM COFFEE BEANS ONLY. DO NOT
USE OILY, FLAVORED OR SUGAR COATED ESPRESSO / COFFEE BEANS.
When you first make coffee with the machine or after a prolonged period of non-use or a cleaning or des-
caling procedures, a little steam and hot water will come out of the steam nozzle (priming).
Splashing or scalding may occur if the coffee outlets are set too high in relation to the size of the cups.
With a simple touch of a button, you can prepare 4 types of beverages: espresso, strong espresso, coffee and
long coffee.
Amount of water
Espresso 0.7 - 2.3 oz / 20 - 70 ml
Strong Espresso 0.7 - 2.3 oz / 20 - 70 ml
Coffee 2.7 - 4.0 oz / 80 - 120 ml
Long Coffee 4.0 - 8.0 oz / 120 - 240 ml
Once the
machine has
been turned
on and
pre-heating
has been
completed,
you can
rinse the
coffee
circuit.
Rinsing the cof
fee
circuit:
Place a 17 oz/0.5 l.
container under the
coffee outlets and
steam nozzle then
select "YES" from
the menu
proposed. The
rinsing cycle will
stop automatically
after about 1.3
oz/40 ml.
Rinsing the
steam circuit:
Press the
key to rinse the
steam circuit.
The rinsing
cycle will stop
automatically
after the
volume of
water displayed
has flown.
RINSING OF THE CIRCUITS
DO NOT PUT YOUR HANDS UNDER THE OUTLETS WHEN RINSING PROCESS IS IN PROGRESS.
HOT WATER COMES OUT THROUGH THEM AND MAY CAUSE SCALDING.
FALC DISP USA - 7220.qxp 4/12/07 18:49 Page 8

Krups ESPRESSERIA AUTOMATIC Specifications

General

Pump Pressure	15 bar
Built-in Grinder	Yes
Milk Frother	Yes
Display	LCD
Power	1450 W
Color	Black
Type	Espresso Machine
Water Tank Capacity	1.7 liters