V
vbentonAug 25, 2025
What to do if my Krups ESPRESSERIA AUTOMATIC cleaning program won't start?
- KKelly SolisAug 25, 2025
If the cleaning program refuses to start, disconnect the machine for 20 seconds and then turn it on again.
To Next PageTo Next PageWhat to do if my Krups ESPRESSERIA AUTOMATIC cleaning program won't start?
If the cleaning program refuses to start, disconnect the machine for 20 seconds and then turn it on again.
What to do if my Krups ESPRESSERIA AUTOMATIC Coffee Maker scale removal program won't start?
If the scale removal program refuses to start, disconnect the machine for 20 seconds and then turn it on again.
What to do if my Krups ESPRESSERIA AUTOMATIC is not hot enough?
If your espresso or coffee isn't hot enough, try adjusting the coffee temperature setting. You can also pre-heat your cups by rinsing them with hot water or using the steam nozzle.
What to do if my Krups Coffee Maker coffee is too weak?
If the coffee is too weak, make sure the coffee bean container has enough coffee and that the beans are falling correctly into the grinder. Avoid using oily, sugar-coated, or flavored beans. You can also reduce the coffee volume using the rotating knob, adjust the grinding fineness button to the left for a finer grind, and prepare your beverage in two cycles using the 2-cup function.
What to do if my Krups Coffee Maker has water under it?
If you notice water or coffee under the machine, it's likely that the drip tray is overflowing. Empty and clean the tray, and ensure it's correctly positioned.
Why is my Krups ESPRESSERIA AUTOMATIC Coffee Maker coffee flowing too slowly?
If the coffee flows too slowly, try adjusting the grinding fineness button to the right for a coarser grind, as this may depend on the type of coffee you're using. You can also try running one or several rinsing cycles.
What to do if my Krups Coffee Maker displays a fault message?
If a “Fault No. XX” message appears, disconnect the machine for 20 seconds and then reconnect it. If the issue continues, note the fault number and contact the Krups Service Center.
What to do if my Krups Coffee Maker coffee is not creamy enough?
If the coffee isn't creamy enough, try turning the grinding fineness button to the left for a finer grind, which may depend on the coffee type. You can also change the Claris Aqua filter, following the instructions on page 6, and perform one or several rinsing cycles.
What to do if my Krups ESPRESSERIA AUTOMATIC Coffee Maker has a power failure during cycle?
If a power failure occurred during a cycle, the machine will automatically re-initialize when the power is restored and be ready for a new cycle.
What to do if my Krups ESPRESSERIA AUTOMATIC Coffee Maker won't turn on?
If your machine fails to turn on, check that the power cord is properly plugged into the socket.
Lists essential safety measures to reduce fire, shock, and injury risks.
Advises on extension cord use, rating, and arrangement to prevent hazards.
Identifies and labels the main parts and controls of the espresso machine.
Lists optional accessories available for purchase for the machine.
Explains the various indicator lights and their meanings for machine operation.
Describes warning signals and required actions for troubleshooting.
Provides guidance on using oily coffee beans for optimal performance.
Offers proportions for popular coffee drinks like Cappuccino and Caffe Latte.
Specifies the intended household use and warranty voiding conditions.
Details how to test and set the water hardness level for the machine.
Explains the benefits and installation of the water filter cartridge.
Guides the user through setting the machine's water hardness level.
Instructs on how to adjust the coffee brewing temperature.
Explains how to program the machine's automatic shut-off timer.
Details the process for rinsing the coffee and steam circuits before first use.
Provides instructions on how to adjust the coffee grinder fineness.
Explains how to prepare different types of espresso and coffee.
Describes how to brew two cups of coffee or espresso simultaneously.
Provides step-by-step instructions for frothing milk with the steam nozzle.
Explains the use and maintenance of the optional auto-cappuccino accessory.
Details how to empty and clean the coffee grounds collector, cleaning tray, and drip tray.
Guides through the machine's automatic cleaning cycle.
Outlines the stages of the machine's cleaning cycle.
Explains when and how to perform a long rinsing cycle.
Details the process for descaling the machine to remove mineral deposits.
Covers routine cleaning and care of external parts and the water tank.
Provides advice on moving the machine and responsible disposal.
Lists common issues and their corrective actions for the espresso machine.
Outlines the warranty period, coverage, and exclusions for the product.
Provides contact details for customer support and service inquiries.
This document describes the KRUPS Espresseria Automatic espresso machine, a sophisticated appliance designed for household use to prepare espresso, coffee, and froth milk. It is not intended for commercial or professional purposes.
The KRUPS Espresseria Automatic is an advanced coffee machine that grinds whole coffee beans and brews various coffee beverages with a simple touch of a button. It offers four types of beverages: espresso (20-70 ml/0.7-2.4 oz), strong espresso (20-70 ml/0.7-2.4 oz), coffee (80-120 ml/2.7-4.0 oz), and long coffee (120-220 ml/4.0-7.4 oz). The machine features a grinding fineness selector knob, allowing users to adjust the grind for a finer (stronger flavor) or coarser (milder flavor) coffee. This adjustment should be made during the grinding process.
Beyond coffee, the machine also incorporates a steam function for frothing milk, ideal for preparing cappuccinos and caffe lattes. It can also be used to reheat other liquids. The steam nozzle is designed for efficient milk frothing, and for those seeking greater convenience, an optional Auto-Cappuccino accessory (XS6000, sold separately) simplifies the process of creating milk-based drinks.
The machine is equipped with a digital display for parameter settings and various operating lights that indicate its status and required actions. These lights guide the user through different stages, such as pre-heating, brewing, cleaning, descaling, and error conditions.
Before first use, the machine requires an initial set-up process, including measuring and setting water hardness, setting the desired coffee temperature, and programming the automatic shut-off feature. The water hardness can be determined using a provided test strip, and the machine can be programmed for levels from 0 (very soft) to 4 (extremely hard). The coffee temperature can be adjusted to personal preference, and the automatic shut-off can be set for durations of 1, 2, 3, or 4 hours of non-use. These settings are memorized even after a power failure.
The machine is designed to use only fresh, whole coffee or espresso beans. Oily or sugar-coated beans, as well as flavored beans, are not recommended as they can clog the grinder and damage the machine. If using oily beans, it is advised to stir them in the coffee hopper before use. Frozen beans should be thawed for at least 4 hours to prevent moisture from entering the grinder. Ground coffee should never be put into the coffee bean container.
To prepare a beverage, users simply place a cup under the coffee outlets, select the desired coffee type and volume using the adjustment knob, and press the corresponding key. The coffee outlets have height-adjusting handles to accommodate different cup sizes. For two cups, the machine can be cycled twice by pressing the desired coffee key rapidly in succession. The machine will automatically sequence through two complete cycles.
The steam function involves pressing the steam button, waiting for the pre-heating phase to complete, and then pressing the button again to start steam generation. The steam cycle automatically stops after a maximum of 2 minutes. For frothing milk, pasteurized 1% or 2% cold milk (ideally between 42.8° F/6° C and 46.4° F/10° C) is recommended.
The KRUPS Espresseria Automatic comes with a Claris - Aqua Filter System cartridge (F088) to optimize coffee taste and extend machine lifetime by reducing chlorine, impurities, lead, copper, and pesticides in the water. This filter should be replaced approximately every 50 liters of water or every two months.
Regular maintenance is crucial for the optimal functioning and longevity of the machine. The appliance provides clear indications through its operating lights when maintenance is required.
Key maintenance tasks include:
In case of operating errors, the machine's lights will provide specific indications, and a troubleshooting guide is included in the manual to help resolve common issues. For persistent problems, users are advised to contact a KRUPS Service Center. The machine is covered by a limited warranty for 1 year or a maximum of 3,000 cycles, provided instructions for use and maintenance are followed.
General| Pump Pressure | 15 bar |
|---|---|
| Built-in Grinder | Yes |
| Milk Frother | Yes |
| Display | LCD |
| Power | 1450 W |
| Color | Black |
| Type | Espresso Machine |
| Water Tank Capacity | 1.7 liters |
