KRUPS SERIE EA9000
44
3
Place a recipient with a capacity of at least 0.6 litres under the coffee
nozzles and press OK.
The descaling phase will start.
4
When the descaling is complete: Empty your recipient and put it
back, then empty the water tank, rinse it well and fill it again.
The first rinsing will start.
5
End of the first rinsing: Empty your recipient and replace it.
6
End of the second rinsing and of the steam circuit descaling phase.
The nozzle returns to its cleaning container.
Refit the Claris Aqua Filter System filter, if necessary.
Empty your recipient and fill the water tank.
Caution: During the descaling or coffee circuit cleaning programmes, water can splash quite strongly.
If required, place a paper towel on the drip tray.
!
To Next Page
Loading...
Need help?
General
