DEFRNLITEN
47
ENGLISH
PROBLEM / MALFUNCTION PROBABLE CAUSES CORRECTIVE ACTIONS
Nozzle cleaning does not take
place properly.
No cleaning liquid.
The milk used is not suitable.
Check that your preparation does
not boil while heating or frothing.
If it does, reduce the heating
and/or frothing time.
Check that the cleaning liquid
bottle is not empty.
Carry out a manual cleaning.
We recommend that you use cold
milk.
The water tank has been filled,
but the warning message is still
displayed on the screen.
The water tank is not fitted
properly.
The float at the bottom of the tank
does not move freely.
The water tank is scaled up.
Check and unblock the float if
necessary.
Reinstall the water tank properly
until you feel some resistance.
Rinse the water tank under
running water and descale, if
necessary.
The drip tray has been emptied,
but the warning message is still
displayed on the screen.
The metal contacts are dirty.
Clean and wipe the metal
contacts at the back of the drip
tray.
The used coffee collector has
been emptied, but the warning
message is still displayed on the
screen.
The used coffee collector is not
fitted properly.
The used coffee collector has
been fitted back too quickly.
Refit the used coffee collector.
Wait for at least 8 seconds before
refitting the empty collector.
A power failure occurs during
the cycle.
The appliance is automatically
reinitialised when it is switched
back on.
There is water underneath the
appliance.
The drip tray is not correctly fitted
or is overflowing.
Check that the drip tray has been
fitted correctly and empty it if
required.
Danger: Only a qualified technician is authorised to carry out repairs on the power cord and the
220 - 240V electrical system. Failure to respect this exposes you to fatal injuries due to
the presence of electricity! Do not use an appliance that is visibly damaged!
Note: Programming problems are often resolved by unplugging the appliance for about one minute and
then plugging it in again.
!
To Next Page
Loading...
Need help?
General
