Krups Evidence Eco-Design EA897B10

6766
ENGLISH
PREPARING DRINKS
DRINKS AVAILABLE FROM THIS MACHINE AND POSSIBLE SETTINGS:
Drinks
Approximate
size
Recommended
volume
Coee
strength
X2
Extra Shot
Ristretto
Short espresso with body
M = 20 ml
L = 25 ml
XL = 35 ml
L
  
Espresso
Full-bodied espresso with pronounced aromas, covered
with a slightly bitter caramel-coloured crema
M = 40 ml
L = 55 ml
XL = 70 ml
M
  
Long coee
Higher in caeine but lighter on the palate. Very popular
in the morning
M = 80 ml
L = 120 ml
XL = 180 ml
L
  
Americano
Double long espresso combined with hot water
M = 90 ml
L = 120 ml
XL = 150 ml
L
  
Cappuccino
A balance between milk, foam and coee
M = 120 ml
L = 180 ml
XL = 240 ml
L
  
Cae Latte
Milk foam with a subtle coee avour
M = 200 ml
L = 280 ml
XL = 350 ml
L
  
Latte Macchiato
A large helping of milk, a gourmet Espresso with milk foam
M = 190 ml
L = 250 ml
XL = 340 ml
L
  
HOT WATER
M = 100 ml
L = 200 ml
XL = 300 ml
L

Hints & Tips
Every time you choose a drink, the machine will use the most recent settings.
For each recipe, you can increase the volume of your drink during the recipe.
FOR YOUR INFORMATION, YOUR MACHINE WILL AUTOMATICALLY PERFORM THE FOLLOWING
STEPS TO PREPARE YOUR DRINK:
For coee recipes For milky recipes not including Cae Latte: For Cae Latte:
1. Grinding the coee beans
2. Compaction of the grinding
3. Pre-infusion (some drops may
fall into your cup at this stage)
4. Percolation
1. Preheating stage
2. Milk frothing
3. Grinding the coee beans
4. Compaction of the grinding
5. Pre-infusion (some drops may fall into
your cup at this stage)
6. Percolation
1. Grinding the coee beans
2. Compaction of the grinding
3. Pre-infusion (some drops may fall
into your cup at this stage)
4. Percolation
5. Preheating stage
6. Milk frothing
AMERICANO
For this recipe, your machine will make two espressos one after the other. There will therefore be two grindings followed
by the addition of hot water.
HOW TO ADJUST THE HEIGHT OF THE COFFEE NOZZLES
For all of the drinks proposed you can lower and reassemble the coee nozzles according to the size of your cup(s).
HOW TO INSTALL THE CLARIS AQUA FILTER SYSTEM CARTRIDGE
• Your machine should be plugged in and switched on
• The cartridge is placed in the water tank
• Place the cartridge with the numbered ring at the top
• Use the black screwing accessory supplied with the cartridge to properly position and screw in the
cartridge
• On your illuminated screen
, press for 3 seconds. A beep will conrm entry into the Installing the lter
menu. Place a container under the nozzles.
• The button
ashes and the coee rinsing image is lit up.
• Press
to initiate use of the lter.
• The lights under the recipes will fade in and out during installation.
• Installation is complete when the light is steady again.
GRINDER: ADJUSTING THE GRINDING FINENESS
You can adjust the strength of your coee by adjusting the grinding neness of the coee beans.
Varying the grinding neness makes it possible to adapt to dierent types of bean:
- A highly roasted and oily bean will require a coarse grinding,
- A more lightly roasted bean will be drier and will require a ne grinding.
Note: the ner the grinding, the more powerful the aroma.
Light
(Blonde)
Medium
(Amber)
Strong
(Light
French)
Intense
(French)
Very
intense
(Dark
French)
Roasting:
HOW TO ADJUST THE GRINDING FINENESS
Turn the setting button located in the coee bean container (J) to suit your bean type and the power of aroma desired.
This adjustment must be performed during grinding and notch by notch. After 3 preparations you will notice a distinct
dierence in taste.
Caution: We do not recommend the use of oily and caramelised beans as these are dicult for the grinder to process.
These can damage the machine and lead to poor sensor performance.