5150
ENGLISH
Auto off
You can choose the length of time after which
your appliance will automatically stop (period of
non-use).
Auto-rinse
You can choose to enable automatic rinsing of
the coffee outlet when you start the machine.
Beverage
settings
You can restore the default settings. You can also
permanently enable the Aroma +.
To exit the settings menu, press
“ ”
or the Settings button.
If you unplug the machine, all settings, apart from the date and time,
will be saved in the memory.
INFO
The “Info” menu provides access to a number of pieces of information
about your use and about certain stages in the life of your machine.
It also informs you about its maintenance. The main information
available is:
Drinks made Displays the number of drinks made.
Coffee circuit
cleaning
Indicates that this should be carried out in x
cycles.
Descaling
Indicates that this should be carried out in x
cycles.
Filter
Indicates that this will need to be changed in x
days or x litres.
To exit the “Info” menu, press
“ ”
or the “Settings” button.
ANSWERS TO YOUR QUESTIONS
OPERATION
1) The machine displays a fault, the software is frozen, OR the
machine is malfunctioning.
Turn off and unplug the machine, remove the lter cartridge, wait
for 1 minute and restart the machine. Press and hold the ON/OFF
button for at least 3 seconds to start.
2) The appliance does not turn on after pressing the ON/OFF button
(for at least 3 seconds).
Check the fuses and the mains power socket. Check that both
plugs are correctly inserted into the socket. If this does not work,
contact your KRUPS customer service department.
3) A power failure occurred during a cycle
The appliance resets automatically when the power is turned on
again.
4) The grinder is running empty.
This is normal if it happens occasionally and if there are no coffee
beans or only a small amount. It can run for up to 10 seconds
empty to nd out its consumption and make sure it’s running
properly.
Coffee beans remain in the container:
• The coffee may be too oily and is, therefore, not being correctly
captured by the appliance.
• You could try helping the beans down and see if that gets it
working again. However, it is advisable to change coffee (see
“Type of beans” function).
• This is my usual coffee that has worked well until now: contact
your KRUPS customer service department.
USE
1) The grinder is making a strange noise.
Foreign bodies are present in the grinder. Try to suck them up
with a vacuum cleaner; otherwise contact your KRUPS customer
service department.
2) There is water under the appliance.
Before removing the drip tray, wait for 15 seconds after a coffee
has been prepared so that the machine nishes its cycle correctly.
Check that the drip tray is correctly positioned on the machine.
It must always be in place even when the machine is not in use.
Check that the drip tray is not full.
Check that the water tank is tted properly
3) The grinding neness adjustment button is difcult to turn.
Turn the grinding neness adjustment button only when the
grinder is operating.
To Next Page
Loading...
