KSB Controlmatic E.2 Manual

Controlmatic E.2
19
Contents
1 General 20....................................................
2 Safety 20......................................................
2.1 Symbols used in these operating instructions 20.....
2.2 Non-compliance with safety instructions 20............
2.3 Safety awareness 20.......................................
2.4 Safety instructions for the operator 20..................
2.5 Safety instructions for maintenance, inspection 20..
and installation work 20....................................
2.6 Unauthorized modification and manufacture of
spare parts 21
................................................
2.7 Unauthorized modes of operation 21....................
3 Transport and temporary storage 21....................
3.1 Transport 21..................................................
3.2 Temporary storage/Preservation 21....................
4 Description of the product and accessories 21........
4.1 Technical specification 21.................................
4.2 Indicator lamps 21...........................................
4.3 Technical data 21............................................
4.4 Designation 21...............................................
4.5 Design details 21............................................
4.6 Accessories 21...............................................
5 Installation at site 22........................................
5.1 Safety regulations 22.......................................
5.2 Checks to be carried out prior to installation 22.......
5.3 Installing the device 22.....................................
5.3.1 Fitting the pressure gauge 22.............................
5.4 Connecting the piping 22..................................
5.4.1 Controlmatic E.2 with dry-installed pump 22...........
5.4.2 Controlmatic E.2 with wet-installed pump 22..........
5.5 Connection to power supply 22...........................
6 Commissioni ng / Star t - up / Shutdown 22.................
6.1 Commissioning 22..........................................
6.1.1 Commissioning with dry-installed pump 22............
6.1.2 Commissioning with wet-installed pump 22............
6.2 Setting the start-up pressure 22..........................
6.3 Shutdown / Temporary storage / Preservation 23....
6.4 Returning to service after s torage 23....................
7 Maintenance / Repair 23...................................
7.1 General instructions 23.....................................
7.2 Servicing / inspection 23...................................
7.3 Water reserve 23............................................
7.4 Drainage / Disposal 23.....................................
7.5 Spare parts stock 23........................................
8 Trouble-shooting 24.........................................
8.1 Signals and indicator lamps see section 4.2 24.......
9 Annex 24......................................................
8.1 Signals and indicator lamps see section 4.2 24.......
9.2 Recycling 24..................................................
9.3 Certification 25...............................................

KSB Controlmatic E.2 Specifications

General

Brand	KSB
Model	Controlmatic E.2
Category	Control Unit
Language	English