KStar UDC9101S One - Symbols Used in This Guide; Installation and Setup Procedures; Unpack Checking and Verification

5
 Pleasereplacethefuseonlywiththesametypeandamperageinordertoavoid
firehazards. 
 DonotdismantletheUPSsystem. 
1-6 Symbolsusedinthisguide
 WARNING!
Riskofelectricshock
CAUTION!
Readthisinformationtoavoidequipmentdamage

2. Installationandsetup
NOTE:Beforeinstallation,pleaseinspecttheunit.Besurethatnothinginsidethe
packageisdamaged.Pleasekeeptheoriginalpackageinasafeplaceforfutureuse.
2-1 Unpackchecking
 Don’tleantheUPSwhenmovingitoutfromthepackaging.
 ChecktheappearancetoseeiftheUPSisdamagedornotduringthe
transportation,donotswitchontheUPSifanydamagefound.Pleasecontactthe
dealerrightaway.
 Checktheaccessoriesaccordingtothepackinglistandcontactthedealerincase
ofmissingparts. 
Itincludes:
(1) UPSuser'sguide
(2) SoftwareSuiteCD
(3) USBcable
(4) Powercord(Inputandoutput) 
(5) RS232cable

