To Next Page
J
jessicahuynhSep 12, 2025
What does 'Inverter is invalid' mean on KStar HPM3340 200k UPS?
- LLaura NelsonSep 12, 2025
If your KStar UPS displays 'Inverter is invalid', it means the inverter on button has been activated.
What does 'Inverter is invalid' mean on KStar HPM3340 200k UPS?
If your KStar UPS displays 'Inverter is invalid', it means the inverter on button has been activated.
What does 'Overload' mean on a KStar HPM3340 200k UPS?
The 'Overload' warning on your KStar UPS means that the load exceeds the system power capacity.
What does 'Mains freq. abnormal' mean on my KStar HPM3340 200k UPS?
If your KStar UPS displays 'Mains freq. abnormal', it indicates that the mains frequency is out of the limit range, causing the rectifier to shut down.
What does 'model set wrong' mean on KStar HPM3340 200k?
If your KStar UPS displays 'model set wrong', it means the model setting of the UPS is incorrect.
What does 'Positive Battery Charger fault' mean on my KStar HPM3340 200k UPS?
If your KStar UPS displays 'Positive Battery Charger fault', it means the positive battery Charger is fault and the charger will be shut down.
What does 'initialization fault' mean on my KStar UPS?
If your KStar UPS displays 'initialization fault', it means that the procedure of initialization is wrong.
What does 'Parallel system load sharing fault' mean on KStar HPM3340 200k?
If your KStar UPS displays 'Parallel system load sharing fault', it means that any unit in a parallel system has an unbalance load share that exceeds 30%.
What does 'DC component over limitation' mean on my KStar UPS?
If your KStar UPS displays 'DC component over limitation', it means that the DC component of the UPS output rating power is larger than the limitation.
What does 'Parallel relay fault' mean on my KStar HPM3340 200k UPS?
If your KStar UPS displays 'Parallel relay fault', it means the relay of the parallel circuit must be turned on when the system is in parallel and the inverter is on.
What does 'DC Bus over-voltage' mean on my KStar UPS?
If your KStar UPS displays 'DC Bus over-voltage', it means the rectifier, inverter and battery converter are shutdown due to high DC bus voltage.
Important safety warnings and precautions for operating the UPS.
Explains warning symbols and their meanings in the manual.
Overview of the UPS series capabilities and specifications.
Details the key functions and advanced features of the UPS system.
Steps for inspecting the UPS unit upon unpacking and checking accessories.
Visual description of the UPS cabinet exteriors for different models.
Visual identification of the front and rear views of a UPS module.
Introduces the components and functions of the UPS module's LCD control panel.
Guidelines for selecting a suitable installation environment for the UPS.
Requirements for external circuit breakers and protective devices for safe installation.
Specifications and guidelines for selecting and installing power cables.
Detailed procedure for connecting power cables to the UPS terminal blocks.
Instructions for correctly connecting the battery framework to the UPS.
Step-by-step guide for replacing UPS modules within the system.
Procedures for installing multiple UPS modules in a parallel system.
Connecting multiple UPS units for parallel system installation.
Connecting control cables for parallel operation between UPS modules.
Description of various operating modes for the UPS system.
Procedures for powering the UPS on, off, and restarting.
Step-by-step guide for restarting the UPS system safely.
Instructions for performing self-tests and load tests on the UPS.
Method for starting the UPS from a completely off state without utility power.
How to activate the maintenance bypass for servicing the UPS.
Safe procedures for completely shutting down the UPS and connected load.
Steps for correctly starting up a UPS system configured in parallel.
Overview of the UPS operating panel and its display functions.
Detailed explanation of the system LCD interface and its controls.
Description of the LCD display interface on individual UPS modules.
Explains the control panel and LEDs for monitoring UPS status and events.
Lists UPS messages and alarms with guidance for troubleshooting.
Information on optional accessories like Network Management Cards.
General
