To Next PageTo Next Page
Need help?Do you have a question about the KStar HPM3300E and is the answer not in the manual?
Detailed safety precautions for operating and handling the UPS.
Explanation of safety symbols and warnings used in the manual.
Overview of the UPS series' capabilities and specifications.
Detailed list of UPS functionalities and advanced features.
Procedures for verifying UPS contents and checking for shipping damage.
Visual identification of the UPS unit and its configurations.
Visual representation of the standalone UPS model.
Visual representation of the sub-rack UPS configuration.
Visual details of the UPS module and its components.
Guides for installing the UPS system.
Steps to convert a standalone UPS into a sub-rack configuration.
Procedures for installing the sub-rack UPS into a cabinet.
Guidelines for proper UPS cabinet placement and spacing.
Requirements for external circuit breakers and protective devices.
Guidelines and specifications for selecting and installing power cables.
Recommended cable dimensions based on UPS capacity.
Specifications for power cable connectors and their installation.
Recommended circuit breaker ratings for UPS input and output connections.
Steps for connecting power cables to the UPS.
Wiring diagram for common UPS input connections.
Wiring diagram for dual UPS input connections.
Procedures for connecting battery strings to the UPS.
Steps for safely replacing UPS modules in an online system.
Installation procedures for parallel UPS systems with multiple modules.
Steps for installing UPS modules into a cabinet for parallel operation.
Instructions for connecting control cables in a parallel UPS configuration.
Optional installation guide for the LBS system.
Configuration steps for LBS system master/slave settings via LCD.
How to connect LBS cables between UPS units.
Overview of total system installation for parallel UPS.
Explains the different operational modes of the UPS.
Procedures for powering the UPS on, off, and restarting.
Steps to properly restart the UPS system.
Steps to perform self-tests on the UPS.
Procedure to start the UPS without utility power.
Procedures for using the UPS maintenance bypass switch.
Step-by-step guide to safely shut down the UPS and load.
Steps for starting up a parallel UPS system.
Overview of the UPS LCD display interface and navigation.
Displays real-time UPS work flow and data.
View voltage, current, and status of UPS components.
View current alarms, history, and manage buzzer settings.
Access user and advanced settings for UPS configuration.
Access software update, touch correction, history download, and battery self-test.
Functions for inverter ON/OFF, battery test, and fault clearing.
Check software versions for monitor, LCD, and internal modules.
Lists UPS alarm and event messages for troubleshooting.
Information on optional network management cards and environmental monitoring.
General
