KTI Networks KGS-1060 User Manual

Power wires : 24 ~ 12AWG (IEC 0.5~2.5mm
2
)
Install the power source wires with the plug properly. Then,
plug in input contacts. If cascading the power to
next switch device is needed, install the power wires and plug for another switch. Then, use another Vdc
contacts.
Note:
1. Only up to four device units can be cascaded to receive power from one main power input source.
2. The maximal length of the power wire is 1 meter.
-17-

KTI Networks KGS-1060 Specifications

General

Brand	KTI Networks
Model	KGS-1060
Category	Switch
Language	English