Need help?Do you have a question about the KTM 125 DUKE 2022 and is the answer not in the manual?
General| Displacement | 124.7 cc |
|---|---|
| Bore x Stroke | 58 mm x 47.2 mm |
| Cooling | Liquid cooled |
| Compression Ratio | 12.8:1 |
| Transmission | 6-speed |
| Front Suspension | WP APEX 43 |
| Rear Suspension | WP APEX Monoshock |
| Seat Height | 830 mm |
| Ground Clearance | 175 mm |
| Fuel Tank Capacity | 13.4 liters |
| Starter | Electric starter |
| Engine Type | Single Cylinder, 4-Stroke Engine |
| Torque | 12 Nm |
| Fuel System | Electronic fuel injection |
| Front Tire | 110/70 R17 |
| Rear Tire | 150/60 R17 |
| Dry Weight | 139 kg |
| Frame | Steel Trellis Frame, Powder Coated |
| Front Brake | 300 mm Disc, Four-Piston Radial Fixed Caliper |
| Rear Brake | 230 mm Disc, Single-Piston Floating Caliper |
Details the positions of the ignition and steering lock for operation and security.
Explains how to select and activate different ABS modes (Road, Super Moto).
Essential safety warnings and advice for preparing the motorcycle before its first ride.
Specific guidelines for breaking in the engine, including RPM limits and throttle use.
Comprehensive list of checks to ensure the motorcycle is roadworthy before each trip.
Procedure for starting the engine, including safety precautions and battery checks.
Step-by-step guide to starting the engine, including safety system engagement.
Detailed instructions on how to apply the brakes effectively and safely.
Guidelines for stopping, parking, and securing the motorcycle.
Detailed instructions for refueling, including fire and poisoning hazards.
List of essential maintenance tasks with their intervals (time and mileage).
List of recommended maintenance tasks and their intervals.
Instructions for adjusting rear shock absorber spring preload for optimal handling.
Steps for cleaning the chain using cleaner and chain spray.
Guidance on checking and verifying the correct chain tension.
Detailed steps for adjusting chain tension using adjusting screws and checking alignment.
Explains the ABS system, its components, and how it prevents wheel lock-up.
Warnings about vehicle modifications affecting ABS and adapting riding style.
Procedure for measuring brake disc wear and checking for damage.
Instructions for checking the front brake fluid level and identifying leaks or worn linings.
Steps for adding front brake fluid, including safety and fluid type information.
Procedure for checking the minimum thickness and condition of front brake linings.
Procedure for measuring and verifying the free travel of the foot brake lever.
Steps for adjusting the foot brake lever free travel to specifications.
Instructions for checking the rear brake fluid level and identifying issues.
Procedure for adding rear brake fluid, with safety and fluid type notes.
Procedure for checking the minimum thickness and condition of rear brake linings.
Step-by-step guide for safely removing the front wheel.
Procedure for correctly installing the front wheel, including bearing checks.
Step-by-step guide for safely removing the rear wheel.
Procedure for correctly installing the rear wheel, including bearing checks and brake actuation.
Final steps for tightening wheel spindle, sensors, and chain guard.
Guidelines for inspecting tires for cuts, damage, and tread depth.
Procedure for checking tire pressure when cold and adjusting as needed.
Step-by-step instructions for safely removing the 12-V battery, with safety warnings.
Procedure for correctly installing the 12-V battery and reconnecting cables.
Instructions for charging the battery, including safety and charging current limits.
Procedure for locating and replacing the main fuse, with safety warnings.
Procedure for replacing the fuse for the ABS hydraulic unit.
Procedure for replacing the fuse for the ABS return pump.
Locating and replacing fuses for various electrical components.
Safety warnings and procedures for checking coolant level and antifreeze protection.
Procedure for checking coolant level and antifreeze in the compensating tank.
Instructions for checking the radiator coolant level and identifying losses.
Detailed steps for checking and correcting the coolant level in the compensating tank.
Procedure for checking coolant level in the compensating tank and radiator.
Instructions for safely draining the motorcycle's cooling system.
Procedure for draining the coolant, including safety precautions.
Steps for filling the cooling system with coolant and removing air bubbles.
Procedure for filling the radiator and bleeding air from the cooling system.
Steps for draining, refilling, and checking the coolant level after replacement.
Procedure for checking throttle cable free play and idle speed stability.
Steps for adjusting throttle cable play using the barrel adjuster.
Procedure for checking and adjusting clutch lever free play to prevent slippage.
Instructions for adjusting clutch lever play using the adjusting screw and lock nut.
Procedure for checking engine oil level when the engine is at operating temperature.
Steps for draining oil, replacing the oil filter, and cleaning the oil screen.
Details on removing the oil filter cover, oil filter, and refilling with engine oil.
Instructions for refilling engine oil, including oil type and quantity recommendations.
Procedure for adding engine oil and ensuring the engine is oil-tight.
Guidelines for washing the motorcycle, avoiding high pressure, and using cleaners.
Steps for storing the motorcycle, including fuel additive, cleaning, and battery care.
Steps to ready the motorcycle for use after a period of storage.
Addresses issues like engine not turning, starting, or having low power.
Troubleshooting engine overheating, malfunction indicator, and ABS warning lights.
Solutions for non-functioning headlights, turn signals, and display issues.
Troubleshooting discharged batteries and charging system faults.
Resolving issues with the combination instrument display and speedometer.
Specifications for engine design, displacement, bore, stroke, and valve control.
List of torque specifications for various engine screws and nuts.
Further torque specifications for engine components like balancer shaft and cylinder head.
Specifies the required quantities for engine oil and coolant.
Specifications for frame type, fork, shock absorber, and suspension travel.
Details on brake disc dimensions, wear limits, and tire pressure settings.
List of torque specifications for various chassis screws and nuts.
To Next Page
