KTM 1290 Super Duke GT 2018 User Manual (English)

Other manuals for KTM 1290 Super Duke GT 2018

Questions and Answers:

P
Paul FreemanAug 13, 2025
What to do if my KTM 1290 Super Duke GT 2018 Motorcycle engine does not crank when pressing the electric starter button?
- R
  Rachel StewartAug 13, 2025
  If your KTM motorcycle engine isn't cranking when you press the electric starter, consider these potential causes and solutions: * The emergency OFF switch is off: Press the emergency OFF switch to the ON position. * Operating error: Follow the correct start procedure. * The battery is discharged: Recharge the battery and check the open-circuit current. * The safety start system is faulty: Read out the fault memory using the KTM diagnostics tool. * CAN bus communication error: Read out the fault memory using the KTM diagnostics tool. * Fault in the engine electronics control unit: Read out the fault memory using the KTM diagnostics tool. * Fault in the MCU control unit: Read out the fault memory using the KTM diagnostics tool.
J
Jeff RodriguezAug 17, 2025
What to do if my KTM Motorcycle engine turns but does not start?
- W
  washingtonchristinaAug 17, 2025
  If the engine turns over but doesn't start, check these: * The fuel hose connection: Reconnect the coupling of the fuel hose connection if it is not connected. * Fuel injection system: Read out the fault memory using the KTM diagnostics tool, as there may be a defect. * Fuel quality: Add suitable fuel if the current fuel is insufficient.
S
Shannon DanielAug 20, 2025
What causes high oil consumption in my KTM 1290 Super Duke GT 2018 Motorcycle?
- T
  Timothy MontgomeryAug 20, 2025
  High oil consumption in your KTM motorcycle could be due to: * Engine oil level being too high: Check the engine oil level. * Engine oil being too thin (low viscosity): Change the engine oil and oil filter, and clean the oil screens.
M
Mike DominguezAug 25, 2025
What to do if my KTM 1290 Super Duke GT 2018 engine dies during the trip?
- R
  rhonda99Aug 26, 2025
  If your KTM motorcycle engine dies while you're riding, it could be due to: * Lack of fuel: Refuel the motorcycle. * Defect in the fuel injection system: Read out the fault memory using the KTM diagnostics tool.
A
Andrea WatsonAug 28, 2025
Why is my KTM 1290 Super Duke GT 2018 battery discharged?
- M
  Michael RothAug 28, 2025
  A discharged battery in your KTM motorcycle may be caused by: * The hazard warning flasher being switched on: Switch off the hazard warning flasher and recharge the battery. * The battery not being charged by the alternator: Check the charging voltage. * The ignition not being switched off while parked: Recharge the battery.
B
Bradley HammondSep 1, 2025
What to do if the combination instrument shows nothing on the display of my KTM Motorcycle?
- B
  Brandon TurnerSep 1, 2025
  If the combination instrument display is blank, there could be several reasons: * Fuse 1 might be blown: Change the fuses in the fuse box. * The main fuse might be blown: Change the main fuse. * The battery might be discharged: Recharge the battery and check the open-circuit current. * The ignition/steering lock might be faulty: Check the ignition/steering lock.
J
Jonathan CruzSep 4, 2025
Why does the ABS indicator lamp light up on my KTM Motorcycle?
- K
  Kendra PatelSep 5, 2025
  The ABS indicator lamp might light up on your KTM motorcycle due to: * A blown ABS fuse: Replace the fuses in the fuse box. * A large difference in wheel speeds: Stop the vehicle, switch off the ignition, and start it again. * A malfunction in the ABS: Read out the fault memory using the KTM diagnostics tool.
S
Sharon OliverSep 9, 2025
What does it mean if the malfunction indicator lamp lights up or flashes on my KTM 1290 Super Duke GT 2018 Motorcycle?
- R
  Rhonda Miller DDSSep 9, 2025
  If the malfunction indicator lamp lights up or flashes, it indicates a defect in the fuel injection system. You should read out the fault memory using the KTM diagnostics tool.