STORAGE 20
149
Info
Do not use non-porous materials since they prevent
humidity from escaping, thus causing corrosion.
Avoid running the engine for a short time only. Because
the engine will not warm up sufficiently, the water
vapor produced during combustion will condense, caus-
ing engine parts and the exhaust system to rust.
20.2 Preparing for use after storage
401059-01
– Remove the motorcycle from the lift stand. ( p. 63)
– Install the 12-V battery. ( p. 112)
– Perform checks and maintenance measures when preparing for
use. ( p. 44)
– Make a test ride.
To Next Page
Loading...
Need help?
General
