KTM 2010 990 Super Duke User Manual

MAINTENANCE WORK ON FRAME AND ENGINE 101
– Mount the dust cap.
Info
The rubber seal in the dust cap prevents air from leaking out of the tire if the
valve is faulty.
9.41Removing the front spoiler
00
0
11
11
22
B00245-10
– Remove screws  with the washer.
– Loosen screws  and remove the front spoiler from the front.
9.42Installing the front spoiler
00
0
11
11
22
B00245-10
– Position the front spoiler.
– Mount and tighten screws  with the washer.
Guideline
Screw, front spoiler M6 10 Nm
(7.4 lbf ft)
Loctite
®
243™
– Fully tighten screws .

KTM 2010 990 Super Duke Specifications

General

Displacement	999 cc
Bore x Stroke	101 mm x 62.4 mm
Compression Ratio	11.5:1
Fuel System	Electronic Fuel Injection
Transmission	6-speed
Rear Suspension	WP monoshock
Front Tire	120/70 ZR17
Rear Tire	180/55 ZR 17
Engine Type	LC8, 75° V-twin
Power	120 hp (89 kW) @ 9, 000 rpm
Torque	100 Nm
Frame	Steel trellis frame
Front Suspension	WP 48 mm USD forks
Front Brake	Dual 320 mm discs
Rear Brake	240 mm disc
Dry Weight	186 kg
Fuel Capacity	18.5 liters