KTM 2010 990 Super Duke User Manual

MAINTENANCE WORK ON FRAME AND ENGINE 75
Guideline
Screw, handlebar support M10 45 Nm
(33.2 lbf ft)
Info
Position the handlebar supports evenly on the left and right.
– Position the handlebar.
Info
Ensure that the cables and lines are routed correctly.
– Position the handlebar clamp. Mount and tighten the four screws  and tighten evenly.
Guideline
Screw, handlebar clamp M8 20 Nm
(14.8 lbf ft)
9.19Checking the chain for dirt
400678-01
– Check the chain for coarse dirt accumulation.
» If the chain is very dirty:
– Clean the chain. ( p. 76)

KTM 2010 990 Super Duke Specifications

General

Displacement	999 cc
Bore x Stroke	101 mm x 62.4 mm
Compression Ratio	11.5:1
Fuel System	Electronic Fuel Injection
Transmission	6-speed
Rear Suspension	WP monoshock
Front Tire	120/70 ZR17
Rear Tire	180/55 ZR 17
Engine Type	LC8, 75° V-twin
Power	120 hp (89 kW) @ 9, 000 rpm
Torque	100 Nm
Frame	Steel trellis frame
Front Suspension	WP 48 mm USD forks
Front Brake	Dual 320 mm discs
Rear Brake	240 mm disc
Dry Weight	186 kg
Fuel Capacity	18.5 liters