7 SPEEDOMETER 23
7.9 Setup menu
400344-01
Condition
• The motorcycle is stationary.
– Repeatedly press the button briefly until H appears at the bottom right of the
display.
– Press the button for 2–3 seconds.
The Setup menu displays the active functions.
Info
Repeatedly press the button briefly until the desired function is reached.
If no button is pressed for 20 seconds, the settings are automatically saved.
Briefly press the
button .
Activates the flashing display and changes to the next display
Press the button
for 2–3 seconds.
No function
Briefly press the
button .
Deactivates the flashing display and changes to the next dis-
play
Press the button
for 2–3 seconds.
No function
Wait 3–5 seconds Changes to the next display without changes
Wait 10–12 sec-
onds
Setup menu starts, stores the settings, and changes to H or
ODO.
7.10 Setting the unit of measurement
400329-01
Condition
• The motorcycle is stationary.
– Repeatedly press the button briefly until H appears at the bottom right of the
display.
– Press the button for 2–3 seconds.
– Repeatedly press the button briefly until Km/h/Mph flashes.
In measurement unit mode, you can change the unit of measurement.
Info
If no button is pressed for 5 seconds, the settings are automatically saved.
Briefly press the
button .
Starts selection, activates Km/h display
Press the button
for 2–3 seconds.
No function
Briefly press the
button .
Activates Mph display
Press the button
for 2–3 seconds.
No function
Wait 3–5 seconds Changes to the next display, changes from selection to the
Setup menu
Wait 10–12 sec-
onds
Saves and closes the Setup menu
To Next Page
Loading...
Need help?
General
