KTM 250 SX 2018 User Manual

6 CONTROLS 16
6.10 Choke
A00017-10
(All SX models)
Choke
1
is fitted on the left side of the carburetor.
A00021-10
(All XC models)
Choke
1
is fitted on the left side of the carburetor.
Activating the choke function frees a drill hole in the carburetor through which the
engine can draw extra fuel. This results in a richer fuel-air mixture, which is needed
for a cold start.
Info
If the engine is warm, the choke function must be deactivated.
Possible states
• Choke function activated – The choke lever is pulled out to the stop.
• Choke function deactivated – The choke lever is pushed in to the stop.
6.11 Shift lever
401950-10
Shift lever
1
is mounted on the left of the engine.
401950-11
(All XC models)
The gear positions can be seen in the photograph.
The neutral or idle position is between the first and second gears.
401950-13
(All SX models)
The gear positions can be seen in the photograph.
The neutral or idle position is between the first and second gears.

KTM 250 SX 2018 Specifications

General

Displacement	249 cm³
Bore x Stroke	66.4 mm x 72 mm
Starter	Kickstarter
Transmission	5-speed
Rear Suspension	WP shock absorber with linkage
Fuel Capacity	7.5 liters
Front Tire	80/100-21"
Rear Tire	110/90-19"
Ground Clearance	375 mm
Seat Height	960 mm
Engine Type	Single-cylinder, 2-stroke
Front Suspension	WP AER 48, USD fork
Front Brake	Disc brake
Rear Brake	Disc brake
Ignition	Digital CDI
Wheelbase	1485 mm
Frame	Central double-cradle-type frame
Fuel System	Carburetor