KTM 250 sx-f usa 2014 User Manual

10 TUNING THE CHASSIS 32
– Turn counterclockwise by the number of clicks corresponding to the fork type.
Guideline
Compression damping (SX‑F USA)
Comfort 17 clicks
Standard 15 clicks
Sport 13 clicks
Compression damping (XC‑F)
Comfort 17 clicks
Standard 15 clicks
Sport 13 clicks
Info
Turn clockwise to increase damping; turn counterclockwise to reduce
damping.
10.13 Adjusting the rebound damping of the fork
Info
The hydraulic rebound damping determines the fork suspension behavior.
102056-10
(SX‑F EU)
–
Remove protection caps

.
–
Turn adjusting screws

clockwise all the way.
Info
Adjusting screws

are located at the bottom end of the fork legs.
Make the same adjustment on both fork legs.
– Turn counterclockwise by the number of clicks corresponding to the fork type.
Guideline
Rebound damping
Comfort 14 clicks
Standard 12 clicks
Sport 10 clicks
Info
Turn clockwise to increase damping; turn counterclockwise to reduce
damping.
–
Mount protection caps

.
C00407-11
(SX‑F USA, XC‑F)
–
Turn the red adjusting screw

all the way clockwise.
Info
Adjusting screw

is located at the upper end of the right fork leg.
The rebound damping is located in the right fork leg (red adjusting
screw). The compression damping is located in the left fork leg (white
adjusting screw).
– Turn counterclockwise by the number of clicks corresponding to the fork type.

KTM 250 sx-f usa 2014 Specifications

General

Brand	KTM
Model	250 sx-f usa 2014
Category	Motorcycle
Language	English