11 SERVICE WORK ON THE CHASSIS 42
11.17 Installing the front fender
C00420-10
Main work
–
Position the front fender. Mount and tighten screws
and
.
Guideline
Remaining screws, chassis M6 10 Nm (7.4 lbf ft)
Finishing work
– Install the start number plate. ( p. 41)
11.18 Removing the shock absorber x
Preparatory work
– Raise the motorcycle with the lift stand. ( p. 34)
–
Remove the manifold. x
102055-11
Main work
–
Remove screw
.
–
Remove fitting
.
102063-10
–
Press angle lever
toward the rear.
–
Press linkage lever
downward.
102064-10
– Lift the swingarm.
To Next Page
Loading...
Need help?
General
