KTM 300 XC 2019 User Manual

10 TUNING THE CHASSIS
48
– Disconnect the fork pump from the left fork leg.
When disconnecting, excess pressure will escape from the
hose – the fork leg itself does not lose any air.
The fork pump indicator switches off automatically after
80 seconds.
– Mount protection cap.
Finishing work
– Remove the motorcycle from the lift stand. ( p. 52)
10.14 Adjusting the compression damping of the fork
Info
The hydraulic compression damping determines the fork suspension behavior.
K01142-10
–
Turn adjusting screw
1
clockwise all the way.
Info
Adjusting screw
1
is located at the upper end of the
right fork leg.
– Turn counterclockwise by the number of clicks corresponding
to the fork type.
Guideline
Compression damping (250 SX EU)
Comfort 17 clicks
Standard 12 clicks
Sport 7 clicks
Compression damping (250 SX US)
Comfort 17 clicks
Standard 12 clicks
Sport 7 clicks
Compression damping (All XC models)
Comfort 17 clicks
Standard 12 clicks
Sport 7 clicks
Info
Turn clockwise to increase damping; turn counterclock-
wise to reduce damping.

KTM 300 XC 2019 Specifications

General

Displacement	293.2 cc
Bore x Stroke	72 mm x 72 mm
Starter	Electric starter
Transmission	6-speed
Rear Suspension	WP Xplor PDS shock absorber
Fuel Tank Capacity	9.5 liters
Ground Clearance	370 mm
Cooling	Liquid cooled
Engine Type	2-stroke
Frame	Central double-cradle type 25CrMo4 steel
Front Suspension	WP XPlor 48
Front Brake	Disc brake, Ø 260 mm
Rear Brake	Disc brake, Ø 220 mm
Seat Height	960 mm
Fuel System	Keihin carburetor