KTM 350 EXC-F 2019 User Manual

14 WHEELS, TIRES
106
14.1 Removing the front wheel
Preparatory work
– Raise the motorcycle with the lift stand. ( p. 62)
V00363-10
Main work
– Press the brake caliper onto the brake disc by hand in order to
push back the brake pistons.
Info
Make sure that you do not press the brake caliper
against the spokes when pushing back the brake
pistons.
V00364-10
–
Loosen screw
1
by several rotations.
–
Loosen screws
2
.
–
Press on screw
1
to push the wheel spindle out of the axle
clamp.
–
Remove screw
1
.
V00365-10
Warning
Danger of accidents Damaged brake discs reduce the
braking effect.
– Always lay the wheel down in such a way that the
brake disc is not damaged.
– Holding the front wheel, withdraw the wheel spindle. Take the
front wheel out of the fork.
Info
Do not pull the hand brake lever when the front wheel
is removed.
H00934-10
–
Remove spacers
3
.

KTM 350 EXC-F 2019 Specifications

General

Engine Type	Single cylinder, 4-stroke
Displacement	349.7 cc
Bore x Stroke	88 mm x 57.5 mm
Starter	Electric starter
Transmission	6-speed
Cooling	Liquid cooled
Frame	Central double-cradle type 25CrMo4 steel
Rear Suspension	WP XPLOR PDS shock absorber
Seat Height	960 mm
Ground Clearance	370 mm
Fuel System	Keihin EFI, 42 mm Throttle Body
Front Suspension	WP Xplor 48, USD forks
Front Brake	260 mm disc
Rear Brake	220 mm disc