KTM 390 Adventure 2020 User Manual

10 RIDING INSTRUCTIONS
110
10.1 Checks and maintenance measures when preparing for use
Info
Before every trip, check the condition of the vehicle and ensure that it is roadworthy.
The vehicle must be in perfect technical condition when it is being operated.
H02217-01
– Check the engine oil level. ( p. 234)
– Check the front brake fluid level. ( p. 168)
– Check the rear brake fluid level. ( p. 177)
– Check the front brake linings. ( p. 172)
– Check the rear brake linings. ( p. 181)
– Check that the brake system is functioning properly.
– Check the coolant level. ( p. 222)
– Check for chain dirt accumulation. ( p. 148)
– Check the chain tension. ( p. 150)
– Check the tire condition. ( p. 194)
– Check tire pressure. ( p. 196)
–
Check the settings of all controls and ensure that they can be
operated smoothly.
– Check that the electrical system is functioning properly.
– Check that luggage is properly secured.
– Sit on the motorcycle and check the rear mirror setting.
– Check the fuel level.

KTM 390 Adventure 2020 Specifications

General

Engine Type	Single-cylinder, 4-stroke
Displacement	373.2 cc
Bore x Stroke	89 mm x 60 mm
Power	43 hp (32 kW) @ 9, 000 rpm
Torque	37 Nm @ 7, 000 rpm
Compression Ratio	12.6:1
Transmission	6-speed
Cooling	Liquid cooled
Rear Brake	230 mm Disc, Single-Piston Caliper
Front Tire	100/90-19
Rear Tire	130/80-17
Seat Height	855 mm
Ground Clearance	200 mm
Fuel Capacity	14.5 liters
Weight (Dry)	158 kg
Weight (Wet)	172 kg
Fuel System	Electronic Fuel Injection (EFI)
Frame	Steel trellis
Front Suspension	WP APEX 43 mm USD forks
Rear Suspension	WP APEX monoshock
Front Brake	320 mm disc, 4-piston caliper
Wheelbase	1, 430 mm