What to do if my KTM Motorcycle engine does not crank when the electric starter button is pressed?
If your KTM Motorcycle engine doesn't crank when you press the electric starter, possible causes include an operating error, a discharged battery, a blown fuse (1, 3, 4, or 7), or a missing ground connection. You should go through the engine starting steps, recharge the battery, change the blown fuses, and check the ground connection.
General| Displacement | 373.2 cc |
|---|---|
| Max Torque | 37 Nm @ 7000 rpm |
| Transmission | 6-speed |
| Cooling System | Liquid Cooled |
| Front Suspension | WP APEX 43 |
| Rear Suspension | WP APEX Monoshock |
| Rear Brake | 230 mm disc, single-piston floating caliper |
| Fuel Tank Capacity | 13.7 liters |
| Seat Height | 824 mm |
| Bore x Stroke | 89 mm x 60 mm |
| Compression Ratio | 12.6:1 |
| Frame | Steel Trellis Frame, Powder Coated |
| Engine Type | Single-cylinder, 4-stroke |
| Max Power | 43.5 PS @ 9000 rpm |
| Fuel System | Electronic Fuel Injection |
| Front Brake | 320 mm disc, 4-piston radial caliper |
| ABS | Dual Channel ABS |
| Dry Weight | 172 kg |
| Front Tire | 110/70 R17 |
| Rear Tire | 150/60 R17 |
| Ground Clearance | 158 mm |
To Next Page
