Need help?Do you have a question about the KTM 2015 RC 390 EU and is the answer not in the manual?
General| Brand | KTM |
|---|---|
| Model | 2015 RC 390 EU |
| Category | Motorcycle |
| Language | English |
Explains the meaning of specific symbols used in the manual for clarity.
Details the typographical formats used in the document for consistent understanding.
Defines the intended use of KTM sport motorcycles for road operation.
Provides critical safety instructions for operating the motorcycle.
Emphasizes the importance of wearing appropriate protective gear.
Details warranty conditions and service requirements for maintaining coverage.
Recommends using approved KTM parts and accessories for safety.
Highlights the importance of proper service for optimal operation and wear prevention.
Illustrates and labels components visible from the front left side.
Illustrates and labels components visible from the rear right side.
Explains the location where the chassis number is stamped on the frame.
Specifies the location of the engine number stamped on the engine.
Describes the location and function of the clutch lever.
Details the location and operation of the hand brake lever.
Explains the location and function of the throttle grip.
Locates and describes the function of the electric starter button.
Provides steps on how to lock the motorcycle's steering.
Details the procedure for opening the fuel filler cap.
Identifies the location and operation of the shift lever.
Describes the location and function of the foot brake lever.
Explains the function and operation of the side stand.
Provides a general overview of the instrument display and its components.
Lists and explains various warning messages displayed on the instrument.
Explains the operation of the MODE, SET, and ABS buttons.
Describes the meaning and function of various indicator lights.
Details the different segments and information shown on the instrument display.
Offers essential advice and safety precautions for initial motorcycle use.
Provides guidelines and recommendations for the engine break-in period.
Explains safe loading practices and weight limits to maintain handling.
Lists essential checks and maintenance steps before every ride.
Details the correct procedure for starting the motorcycle's engine.
Provides guidance on gear shifting, riding techniques, and safety.
Explains proper brake application and potential issues.
Outlines mandatory maintenance tasks and their intervals.
Lists recommended maintenance tasks for optimal performance and longevity.
Guides on adjusting the shock absorber spring preload for ride comfort.
Explains how to adjust the position of the shift lever for optimal ergonomics.
Details the process for cleaning the drive chain to ensure proper function.
Explains how to check and adjust the drive chain tension correctly.
Provides instructions for safely removing the left side body panel.
Provides instructions for safely removing the right side body panel.
Explains the ABS system's function, limitations, and warnings.
Guides on inspecting brake discs for wear and damage.
Details how to check the front brake fluid level and add fluid if needed.
Explains how to check the thickness of front brake linings for wear.
Details how to check the rear brake fluid level and add fluid if needed.
Explains how to check the thickness of rear brake linings for wear.
Step-by-step guide for safely removing the front wheel.
Instructions for correctly installing the front wheel.
Step-by-step guide for safely removing the rear wheel.
Instructions for correctly installing the rear wheel.
Guidance on inspecting tires for cuts, wear, and damage.
Details how to check and set correct tire air pressure.
Provides steps for safely removing the motorcycle battery.
Explains the procedure and precautions for recharging the battery.
Guides on replacing fuses for various power consumers.
Instructions for replacing the low beam headlight bulb.
Details how to check and adjust the low beam headlight alignment.
Explains how to check the coolant level in the expansion tank.
Guides on checking antifreeze concentration and coolant level.
Provides steps for safely draining the motorcycle's coolant.
Details the process for filling and removing air from the cooling system.
Explains how to check and adjust the throttle cable play.
Details how to check the clutch lever play for proper operation.
Provides instructions for checking the engine oil level.
Guides on performing engine oil and filter changes.
Offers advice and procedures for cleaning the motorcycle effectively.
Provides steps for preparing and maintaining the motorcycle for winter.
Details the steps required for storing the motorcycle for extended periods.
Outlines the necessary steps to prepare the motorcycle after storage.
Provides detailed technical specifications for the engine.
Lists the capacities for engine oil, coolant, and fuel.
Details technical data for the motorcycle's electrical components.
Provides information on tire sizes and types.
To Next Page