What to do if my KTM 2016 RC 390 engine does not crank when the electric starter button is pressed?
If your KTM Motorcycle engine doesn't crank when you press the electric starter, possible causes include an operating error, a discharged battery, a blown fuse (1, 3, 4, or 7), or a missing ground connection. You should go through the engine starting steps, recharge the battery, change the blown fuses, and check the ground connection.
General| Displacement | 373.2 cc |
|---|---|
| Bore x Stroke | 89 mm x 60 mm |
| Compression Ratio | 12.6:1 |
| Power | 32 kW (44 hp) @ 9, 500 rpm |
| Torque | 35 Nm @ 7, 250 rpm |
| Transmission | 6-speed |
| Rear Suspension | WP monoshock |
| Rear Brake | 230 mm disc, single-piston caliper |
| Front Tire | 110/70 ZR17 |
| Rear Tire | 150/60 ZR17 |
| Seat Height | 820 mm |
| Fuel Tank Capacity | 10 liters |
| Dry Weight | 147 kg |
| Ground Clearance | 178.5 mm |
| Engine Type | Single-cylinder, 4-stroke |
| Fuel System | Electronic Fuel Injection |
| Front Suspension | WP USD 43 mm |
| ABS | Bosch 9MB Two-Channel ABS |
| Frame | Steel trellis frame |
| Front Brake | 300 mm disc, 4-piston radial caliper |
To Next Page