KTM 2016 RC 390 User Manual

10 SERVICE SCHEDULE 74
10.3 Recommended work
Every four years
Every year
Every 7,500 km (4,650 mi)
After 1,000 km (620 mi)
Check the swingarm bearing. ●
Check the wheel bearings. ●
Grease all moving parts (e.g. side stand, hand lever, chain, ...) and check for smooth operation. ○ ● ● ●
Check all hoses (e.g. fuel, cooling, bleeder, drainage, etc.) and sleeves for cracking, leaks, and correct routing. ○ ● ● ●
Check the antifreeze. ○ ● ●
Change the coolant. ●
Check the screws and nuts for tightness. ○ ● ● ●
○ One-time interval
● Periodic interval

KTM 2016 RC 390 Specifications

General

Displacement	373.2 cc
Bore x Stroke	89 mm x 60 mm
Compression Ratio	12.6:1
Power	32 kW (44 hp) @ 9, 500 rpm
Torque	35 Nm @ 7, 250 rpm
Transmission	6-speed
Rear Suspension	WP monoshock
Rear Brake	230 mm disc, single-piston caliper
Front Tire	110/70 ZR17
Rear Tire	150/60 ZR17
Seat Height	820 mm
Fuel Tank Capacity	10 liters
Dry Weight	147 kg
Ground Clearance	178.5 mm
Engine Type	Single-cylinder, 4-stroke
Fuel System	Electronic Fuel Injection
Front Suspension	WP USD 43 mm
ABS	Bosch 9MB Two-Channel ABS
Frame	Steel trellis frame
Front Brake	300 mm disc, 4-piston radial caliper