KTM 2016 RC 390 User Manual

20 STORAGE 160
20.1 Storage
Info
If you want to garage the motorcycle for a longer period, take the following steps.
Before storing the motorcycle, check all parts for function and wear. If service, repairs or replacements are necessary, you should
do this during the storage period (less workshop overload). In this way, you can avoid long workshop waiting times at the start of the
new season.
401058-01
– When refueling for the last time before taking the motorcycle out of service, add fuel
additive.
Fuel additive ( p. 187)
– Refuel. ( p. 70)
– Clean the motorcycle. ( p. 156)
– Change the engine oil and oil filter and clean the oil screens. ( p. 151)
– Check the antifreeze and coolant level. ( p. 141)
– Check the tire air pressure. ( p. 121)
– Remove the battery. ( p. 123)
– Recharge the battery. ( p. 125)
Guideline
Storage temperature of battery without
direct sunlight
0… 35 °C (32… 95 °F)
– Store the vehicle in a dry location that is not subject to large fluctuations in tempera-
ture.
Info
KTM recommends jacking up the motorcycle.
– Raise the motorcycle with the rear wheel stand. ( p. 78)

KTM 2016 RC 390 Specifications

General

Displacement	373.2 cc
Bore x Stroke	89 mm x 60 mm
Compression Ratio	12.6:1
Power	32 kW (44 hp) @ 9, 500 rpm
Torque	35 Nm @ 7, 250 rpm
Transmission	6-speed
Rear Suspension	WP monoshock
Rear Brake	230 mm disc, single-piston caliper
Front Tire	110/70 ZR17
Rear Tire	150/60 ZR17
Seat Height	820 mm
Fuel Tank Capacity	10 liters
Dry Weight	147 kg
Ground Clearance	178.5 mm
Engine Type	Single-cylinder, 4-stroke
Fuel System	Electronic Fuel Injection
Front Suspension	WP USD 43 mm
ABS	Bosch 9MB Two-Channel ABS
Frame	Steel trellis frame
Front Brake	300 mm disc, 4-piston radial caliper