KTM 2016 RC 390 User Manual

24 SUBSTANCES 185
Brake fluid DOT 4 / DOT 5.1
Standard/classification
– DOT
Guideline
– Use only brake fluid that complies with the specified standard (see specifications on the container) and that exhibits the corresponding
properties.
Recommended supplier
Castrol
– RESPONSE BRAKE FLUID SUPER DOT 4
Motorex
®
– Brake Fluid DOT 5.1
Coolant
Guideline
– Only use high quality coolant with corrosion inhibitor for aluminum motors (even in countries with high temperatures). Using inferior
antifreeze can result in corrosion and foaming.
Mixture ratio
Antifreeze protection: −25… −45 °C (−13…
−49 °F)
anti-corrosion/antifreeze
distilled water
Recommended supplier
Motorex
®
– COOLANT M3.0
Engine oil (SAE 15W/50)
Standard/classification
– JASO T903 MA ( p. 189)
– SAE ( p. 189) (SAE 15W/50)

KTM 2016 RC 390 Specifications

General

Displacement	373.2 cc
Bore x Stroke	89 mm x 60 mm
Compression Ratio	12.6:1
Power	32 kW (44 hp) @ 9, 500 rpm
Torque	35 Nm @ 7, 250 rpm
Transmission	6-speed
Rear Suspension	WP monoshock
Rear Brake	230 mm disc, single-piston caliper
Front Tire	110/70 ZR17
Rear Tire	150/60 ZR17
Seat Height	820 mm
Fuel Tank Capacity	10 liters
Dry Weight	147 kg
Ground Clearance	178.5 mm
Engine Type	Single-cylinder, 4-stroke
Fuel System	Electronic Fuel Injection
Front Suspension	WP USD 43 mm
ABS	Bosch 9MB Two-Channel ABS
Frame	Steel trellis frame
Front Brake	300 mm disc, 4-piston radial caliper