KTM 2016 RC 390 User Manual

10 SERVICE SCHEDULE 72
10.1 Additional information
Any further work that results from the required work or from the recommended work must be ordered separately and invoiced separately.
10.2 Required work
Every two years
Every year
Every 15,000 km (9,300 mi)
Every 7,500 km (4,650 mi)
After 1,000 km (620 mi)
Read out the fault memory using the KTM diagnostics tool. ○ ● ● ● ●
Check the functioning of the electrical equipment. ○ ● ● ● ●
Change the engine oil and oil filter and clean the oil screens. ( p. 151) ○ ● ● ● ●
Check the brake discs. ( p. 103) ○ ● ● ● ●
Check the front brake linings. ( p. 106) ○ ● ● ● ●
Check the rear brake linings. ( p. 109) ○ ● ● ● ●
Check the tire condition. ( p. 120) ○ ● ● ● ●
Check the tire air pressure. ( p. 121) ○ ● ● ● ●
Check the brake lines for damage and leakage. ○ ● ● ● ●
Check the brake fluid level of the front brake. ( p. 104) ○ ● ● ●
Check the rear brake fluid level. ( p. 107) ○ ● ● ●
Check the shock absorber and fork for leaks. Perform a fork service and shock absorber service as needed
and depending on how the vehicle will be used.
○ ● ● ● ●
Clean the dust boots of the fork legs. ● ●
Check the chain, rear sprocket, and engine sprocket. ( p. 89) ● ● ● ●

KTM 2016 RC 390 Specifications

General

Displacement	373.2 cc
Bore x Stroke	89 mm x 60 mm
Compression Ratio	12.6:1
Power	32 kW (44 hp) @ 9, 500 rpm
Torque	35 Nm @ 7, 250 rpm
Transmission	6-speed
Rear Suspension	WP monoshock
Rear Brake	230 mm disc, single-piston caliper
Front Tire	110/70 ZR17
Rear Tire	150/60 ZR17
Seat Height	820 mm
Fuel Tank Capacity	10 liters
Dry Weight	147 kg
Ground Clearance	178.5 mm
Engine Type	Single-cylinder, 4-stroke
Fuel System	Electronic Fuel Injection
Front Suspension	WP USD 43 mm
ABS	Bosch 9MB Two-Channel ABS
Frame	Steel trellis frame
Front Brake	300 mm disc, 4-piston radial caliper