KTM 2016 RC 390 User Manual

16 COOLING SYSTEM 138
16.1 Cooling system
L02259-10
Water pump

in the engine circulates the coolant.
The pressure resulting from the warming of the cooling system is regulated by a valve in
radiator cap

. Heat expansion causes excess coolant to flow into compensating tank

.
When the temperature falls, this surplus coolant is sucked back into the cooling system.
This ensures that operating the vehicle at the specified coolant temperature will not result
in a risk of malfunctions.
125 °C (257 °F)

KTM 2016 RC 390 Specifications

General

Displacement	373.2 cc
Bore x Stroke	89 mm x 60 mm
Compression Ratio	12.6:1
Power	32 kW (44 hp) @ 9, 500 rpm
Torque	35 Nm @ 7, 250 rpm
Transmission	6-speed
Rear Suspension	WP monoshock
Rear Brake	230 mm disc, single-piston caliper
Front Tire	110/70 ZR17
Rear Tire	150/60 ZR17
Seat Height	820 mm
Fuel Tank Capacity	10 liters
Dry Weight	147 kg
Ground Clearance	178.5 mm
Engine Type	Single-cylinder, 4-stroke
Fuel System	Electronic Fuel Injection
Front Suspension	WP USD 43 mm
ABS	Bosch 9MB Two-Channel ABS
Frame	Steel trellis frame
Front Brake	300 mm disc, 4-piston radial caliper