KTM 2016 RC 390 User Manual

9 RIDING INSTRUCTIONS 60
9.1 Checks and maintenance when preparing for use
Info
Before every trip, check the condition of the vehicle and ensure that it is roadworthy.
The vehicle must be in perfect technical condition when used.
– Check the engine oil level. ( p. 151)
– Check the brake fluid level of the front brake. ( p. 104)
– Check the rear brake fluid level. ( p. 107)
– Check the front brake linings. ( p. 106)
– Check the rear brake linings. ( p. 109)
– Check the brake system function.
– Check the coolant level in the compensating tank. ( p. 139)
– Check for chain dirt accumulation. ( p. 84)
– Check the chain tension. ( p. 85)
– Check the tire condition. ( p. 120)
– Check the tire air pressure. ( p. 121)
– Check the settings of all controls and ensure that they can be operated smoothly.
– Check the functioning of the electrical equipment.
– Check that baggage is correctly secured.
– Sit on the motorcycle and check the rear mirror setting.
– Check the fuel level.

KTM 2016 RC 390 Specifications

General

Displacement	373.2 cc
Bore x Stroke	89 mm x 60 mm
Compression Ratio	12.6:1
Power	32 kW (44 hp) @ 9, 500 rpm
Torque	35 Nm @ 7, 250 rpm
Transmission	6-speed
Rear Suspension	WP monoshock
Rear Brake	230 mm disc, single-piston caliper
Front Tire	110/70 ZR17
Rear Tire	150/60 ZR17
Seat Height	820 mm
Fuel Tank Capacity	10 liters
Dry Weight	147 kg
Ground Clearance	178.5 mm
Engine Type	Single-cylinder, 4-stroke
Fuel System	Electronic Fuel Injection
Front Suspension	WP USD 43 mm
ABS	Bosch 9MB Two-Channel ABS
Frame	Steel trellis frame
Front Brake	300 mm disc, 4-piston radial caliper