EasyManuals Logo

KTM RC 390 User Manual

KTM RC 390
200 pages
To Next Page IconTo Next Page
To Next Page IconTo Next Page
To Previous Page IconTo Previous Page
To Previous Page IconTo Previous Page
Page #17 background imageLoading...
Page #17 background image
3 IMPORTANT NOTES 15
3.4 Service
A prerequisite for perfect operation and prevention of premature wear is that the service, care, and tuning work on the engine and chassis
is properly carried out as described in the Owner's Manual. Incorrect adjustment and tuning of the engine and chassis can lead to damage
and breakage of components.
Use of the vehicle under difficult conditions, such in rain, high heat or with a heavy load, can lead to considerably more rapid wear of
components such as the drive train, brake system, or suspension components. For this reason, it may be necessary to inspect or replace
parts before the next scheduled service.
It is imperative that you adhere to the stipulated run-in times and service intervals. If you observe these exactly, you will ensure a much
longer service life for your motorcycle.
3.5 Figures
The figures contained in the manual may depict special equipment.
In the interest of clarity, some components may be shown disassembled or may not be shown at all. It is not always necessary to disassem-
ble the component to perform the activity in question. Please follow the instructions in the text.
3.6 Customer service
Your authorized KTM dealer will be happy to answer any questions you may have on your vehicle and KTM.
A list of authorized KTM dealers can be found on the KTM website.
International KTM Website: http://www.ktm.com

Table of Contents

Questions and Answers:

Question and Answer IconNeed help?

Do you have a question about the KTM RC 390 and is the answer not in the manual?

KTM RC 390 Specifications

General IconGeneral
Displacement373.2 cc
Max Torque37 Nm @ 7000 rpm
Transmission6-speed
Cooling SystemLiquid Cooled
Front SuspensionWP APEX 43
Rear SuspensionWP APEX Monoshock
Rear Brake230 mm disc, single-piston floating caliper
Fuel Tank Capacity13.7 liters
Seat Height824 mm
Bore x Stroke89 mm x 60 mm
Compression Ratio12.6:1
FrameSteel Trellis Frame, Powder Coated
Engine TypeSingle-cylinder, 4-stroke
Max Power43.5 PS @ 9000 rpm
Fuel SystemElectronic Fuel Injection
Front Brake320 mm disc, 4-piston radial caliper
ABSDual Channel ABS
Dry Weight172 kg
Front Tire110/70 R17
Rear Tire150/60 R17
Ground Clearance158 mm

Related product manuals