KTM RC 390 User Manual

12 SERVICE WORK ON THE CHASSIS 81
M00453-10
–
Mount protection cap

.
Finishing work
– Take the motorcycle off of the rear wheel stand. ( p. 78)
12.5 Removing the front rider's seat
M00454-10
–
Insert the ignition key in seat lock

and turn it clockwise.
– Raise the rear of the front rider's seat, pull it toward the rear, and remove it upward.
– Remove the ignition key from the seat lock.

KTM RC 390 Specifications

General

Displacement	373.2 cc
Max Torque	37 Nm @ 7000 rpm
Transmission	6-speed
Cooling System	Liquid Cooled
Front Suspension	WP APEX 43
Rear Suspension	WP APEX Monoshock
Rear Brake	230 mm disc, single-piston floating caliper
Fuel Tank Capacity	13.7 liters
Seat Height	824 mm
Bore x Stroke	89 mm x 60 mm
Compression Ratio	12.6:1
Frame	Steel Trellis Frame, Powder Coated
Engine Type	Single-cylinder, 4-stroke
Max Power	43.5 PS @ 9000 rpm
Fuel System	Electronic Fuel Injection
Front Brake	320 mm disc, 4-piston radial caliper
ABS	Dual Channel ABS
Dry Weight	172 kg
Front Tire	110/70 R17
Rear Tire	150/60 R17
Ground Clearance	158 mm