KTM 450 XCR-W USA User Manual

30/ENGINE - WORK ON INDIVIDUAL PARTS 83
ಥ Check the spring length of the oil pressure regulator valve. ( P. 75)
Disassembling the autodecompressor
200166-10
ಥ Take lock ring off of the autodecompressor shaft and dispose of it.
200167-10
ಥ Pull autodecompression shaft out of the camshaft.
200168-10
ಥ Detach autodecompression spring and remove it.
Info
Autodecompression weight cannot be removed.
Assembling the autodecompressor
200169-10
ಥ Check parts for damage and wear. Replace damaged or worn parts.
ಥ Insert the long prong
 of the autodecompression spring in the bore, push the au-
todecompression spring over bearing bolt
 and insert it into the autodecompres-
sion weight
.
200167-11
ಥ Mount the autodecompression shaft in the camshaft.

KTM 450 XCR-W USA Specifications

General

Transmission	6-speed
Fuel Tank Capacity	8.5 L
Ignition	Keihin EMS
Compression Ratio	12.75:1
Starter	Electric starter
Lubrication	Pressure lubrication with 2 oil pumps
Subframe	Aluminum
Suspension Travel Front	300 mm
Suspension Travel Rear	310 mm
Engine Type	Single-cylinder, 4-stroke
Bore x Stroke	95 mm x 63.4 mm
Fuel System	Keihin EMS
Front Suspension	WP Xplor 48
Rear Suspension	WP Xplor PDS shock absorber
Front Brake	Disc brake
Rear Brake	220 mm disc
Cooling	Liquid cooled
Clutch	Wet multi-disc clutch, hydraulically operated
Frame	Central tube frame made of chrome molybdenum steel