What to do if my KTM 500 EXC F 2024 engine dies during the trip?
If your KTM Motorcycle engine dies during the trip, it could be due to a lack of fuel. Refuel your motorcycle. Another cause could be a blown fuse. Check and change the fuses of individual electrical power consumers, specifically fuse 1 or fuse 4.
General| Displacement | 510.9 cm³ |
|---|---|
| Bore x Stroke | 95 mm x 72 mm |
| Starter | Electric starter |
| Transmission | 6-speed |
| Cooling | Liquid cooled |
| Front Suspension | WP XPLOR-USD, Ø 48 mm |
| Rear Suspension | WP XACT Monoshock with linkage |
| Ground Clearance | 355 mm |
| Seat Height | 960 mm |
| Dry Weight | 106.5 kg |
| ABS | No |
| Engine Type | Single Cylinder, 4-Stroke Engine |
| Fuel System | Electronic fuel injection (EFI) |
| Front Brake | Disc brake 260 mm |
| Rear Brake | Disc brake 220 mm |
| Fuel Tank Capacity | 8.5 liters |
| Frame | Central double-cradle type 25CrMo4 steel |
General safety instructions for operating the product safely and avoiding hazards.
Explains risk levels (Danger, Warning, Caution, Note) and associated symbols for hazards.
Identifies and explains various labels found on the vehicle for information and safety.
Instructions on reporting safety defects to authorities and KTM for action.
Provides crucial safety advice for operating the vehicle responsibly and safely.
Emphasizes the importance and legal requirements of wearing appropriate protective gear.
Highlights service importance for longevity and notes on figures in the manual.
Explains the meaning of various indicator lights on the dashboard.
General advice and procedure for the first use and engine break-in.
Lists essential pre-ride checks and maintenance tasks.
Guide for starting the engine and basic riding techniques.
Safety warnings and advice on braking and stopping.
Guidelines for transporting and refueling the motorcycle safely.
Provides a detailed schedule of maintenance tasks by intervals.
How to adjust suspension settings based on rider weight.
Instructions for adjusting shock absorber damping settings.
Step-by-step guide to adjusting rear shock spring preload.
Instructions for adjusting front fork compression and rebound damping.
Procedures for removing and installing frame and fork legs.
Service procedures for triple clamps and steering head bearings.
Procedures for removing/installing fuel tank and servicing the chain.
Steps for checking and changing hydraulic clutch fluid.
Steps for changing front brake linings, including warnings.
Steps for changing rear brake linings, including warnings.
Steps for changing the coolant in the system.
How to check engine oil level and change oil/filter.
Steps for preparing and storing the motorcycle for longer periods.
Troubleshooting for engine crank/start problems.
Troubleshooting for overheating and malfunction indicator lamp.
Lists blink codes for malfunction indicator lamp and their error conditions.
Technical specifications for the engine.
Torque specifications for various engine components.
Torque specifications for various chassis components.
To Next Page
