EasyManua.ls Logo

KTM 85 SX 2003 - Operation Instruments - Controls; Clutch Lever and Hand Brake Lever; Short Circuit Button

KTM 85 SX 2003
38 pages
Print Icon
To Next Page IconTo Next Page
To Next Page IconTo Next Page
To Previous Page IconTo Previous Page
To Previous Page IconTo Previous Page
Loading...
ENGLISH
6
Chassis number
The chassis number is stamped on the right side of the steering head tube.
Enter this number in the field on page no 1.
Engine number
The engine number is stamped into the engine housing underneath the
carburetor. Enter this number in the field on page no 1.
Clutch lever
The clutch lever 1 is located on the left side of the handlebar. The adju-
sting screw
A is used to change the original position of the clutch lever (see
maintenance work on chassis and engine).
Hand brake lever
The hand brake lever 2 is mounted on the handle bars on the right and
actuates the front wheel brake.The adjusting screw
B is used to change the
original position of the hand brake lever (see maintenance work on chassis
and engine).
Short circuit button
The short circuit button 3 turns off the engine. When pressing this button,
the ignition circuit is short-circuited.
SERIAL NUMBER LOCATIONS
OPERATION INSTRUMENTS
1
2
A
B
3

Table of Contents

Related product manuals