What to do if KTM 990 SUPERMOTO T EU Motorcycle turn signal, hazard warning flasher, brake light and horn are not functional?
If the turn signal, hazard warning flasher, brake light, and horn are not functional, it is likely that fuse 1 or 3 is blown. You should change the fuses of individual power consumers.
General| Displacement | 999 cc |
|---|---|
| Bore x Stroke | 101 x 62.4 mm |
| Compression Ratio | 11.5:1 |
| Starter | Electric starter |
| Transmission | 6-speed |
| Cooling | Liquid cooled |
| Final Drive | Chain |
| Clutch | Wet multi-disc clutch, hydraulically operated |
| Subframe | Aluminum |
| Handlebar | Aluminum, tapered |
| Front Wheel | 3.50 x 17" |
| Front Tire | 120/70 ZR 17 |
| Rear Tire | 180/55 ZR 17 |
| Lubrication | Pressure lubrication with 2 oil pumps |
| Frame | Chromoly trellis frame, powder coated |
| Front Suspension | WP USD 48 mm |
| Rear Suspension | WP monoshock |
General instructions and warnings to operate the vehicle safely.
Defines danger, warning, caution, and note levels with their associated symbols.
Details safe operation procedures and warnings about impairments.
Provides an overview of the motorcycle's instrument cluster.
Key safety and operational advice before the first ride.
Guidelines for engine break-in period, including speed limits.
Pre-ride checks to ensure the vehicle is roadworthy.
Step-by-step instructions for starting the motorcycle safely.
Advice on shifting gears and general riding techniques.
Instructions and warnings related to safe and effective braking.
Guidelines and safety precautions for refueling.
Maintenance intervals and tasks for different service points.
How to adjust fork compression damping for optimal suspension behavior.
Steps to adjust fork rebound damping for proper suspension response.
Guidance on setting fork spring preload for rider and load.
Explanation of high-speed and low-speed compression damping for the shock absorber.
How to adjust the rebound damping of the rear shock absorber.
Procedure for adjusting the rear shock absorber's spring preload.
Step-by-step guide to adjust the drive chain tension.
Explanation of the ABS system, its function, and limitations.
Steps to check and maintain the front brake fluid level.
Steps to check and maintain the rear brake fluid level.
Procedure for checking and setting correct tire air pressure.
Safety precautions and steps for removing the motorcycle battery.
Instructions for correctly installing the motorcycle battery.
Process for programming and managing ignition keys.
How to check coolant antifreeze and fluid levels.
Instructions for filling and bleeding air from the cooling system.
Steps to check the engine oil level using the sight glass.
Procedure for engine oil and filter replacement.
Detailed steps for draining oil and cleaning screens.
How to correctly fill the engine with the specified oil type.
Instructions for adding engine oil when the level is low.
Detailed specifications for the motorcycle's engine.
Specifies torque values for various engine components.
To Next Page