ELECTRICAL SYSTEM 16
179
V00624-10
To change the fuse of the ABS hydraulic unit:
–
Take off the protection cap and remove fuse
1
.
Info
A faulty fuse has a burned-out fuse wire
A
.
Warning
Fire hazard Incorrect fuses overload the electrical
system.
– Only use fuses with the required ampere value.
– Do not bypass or repair fuses.
– Use spare fuses with the correct rating only.
Fuse (75011088010) ( p. 241)
Tip
Replace spare fuse
B
in the fuse box so that it is
available if needed.
– Mount the protection cap.
To Next Page
Loading...
