KTM F5360R1 - Filling;Bleeding the Cooling System

COOLING SYSTEM 17
205
V00144-10
Main work
–
Remove radiator cap
1
.
V00145-10
–
Loosen bleeder screw
2
.
Guideline
3 turns
– Tilt the vehicle slightly to the right.
– Pour in coolant until it emerges without bubbles at the bleeder
screw, and then mount and tighten the bleeder screw immedi-
ately.
Coolant ( p. 251)
– Completely fill the radiator with coolant. Mount the radiator
cap.
– Rest the vehicle on the side stand.