KTM F5360R1 - Page 210

17 COOLING SYSTEM
208
– Remove the left side cover. ( p. 136)
– Remove the right side cover. ( p. 139)
V00146-10
Main work
– Position the motorcycle upright.
– Place a suitable container under the engine.
–
Remove screw
1
.
V00144-11
–
Remove radiator cap
2
.
– Completely drain the coolant.
–
Mount and tighten screw
1
with a new seal ring.
Guideline
Screw plug, water
pump drain hole
M6 10 Nm (7.4 lbf ft)