19 SERVICE WORK ON THE ENGINE
218
M01440-10
–
Remove screws
5
. Take off oil filter cover
6
with the O-
ring.
–
Pull oil filter
7
out of the oil filter housing.
– Completely drain the engine oil.
– Thoroughly clean the parts and sealing surface.
L02271-10
–
Insert new oil filter
7
.
–
Oil the O-ring of the oil filter cover. Mount oil filter cover
6
.
– Mount and tighten the screws.
Guideline
Screw, oil filter cover M6 10 Nm (7.4 lbf ft)
Info
Too little engine oil or poor-quality engine oil will result
in premature wear of the engine.
To Next Page
