8 COMBINATION INSTRUMENT
56
Malfunction indicator lamp lights up yellow – The
OBD has detected an error in the vehicle electronics.
Come safely to a halt, and contact an authorized KTM
workshop.
The shift warning lights up/flashes red – The shift
warning light flashes red when the set shift speed
RPM1 is reached. The shift warning light lights up red
when the set shift speed RPM2 is reached.
The idle indicator lamp lights up green – The trans-
mission is in idle.
The high beam indicator lamp lights up blue – The
high beam is switched on.
ABS warning lamp lights up yellow – Status or error
messages relating to ABS.
The immobilizer indicator lamp lights up red – Status
or error message for immobilizer.
The general warning lamp flashes yellow – An oper-
ating safety/warning note was detected. This is also
shown in the display.
To Next Page
Loading...
